- Closed Expansion Tank
- Centrifugal Air Separator
- Microbubble Air Dirt Separator
- Pressurisation Unit
- Pressure Maintaining Station
- Suction Guide With Pall Rings
- Auto Air Vent
- Test Point
- Buffer Tank
- Side Stream Filteration
- Vacuum Degasser
Closed Expansion Tank
Centrifugal Air Separator
Microbubble Air Dirt Separator
Pressurisation Unit
Pressure Maintaining Station
Suction Guide With Pall Rings
Auto Air Vent
Test Point
Buffer Tank
Side Stream Filteration
Vacuum Degasser
Features
- Mild steel shell
- Interchangeable EPDM/Buty membrane
- Maximum operating presure 10 bar
- Working temperature - 10°C to 70°C
- Requires no maintenance
Features
- Removes dissolved air and mcrobubbles
- Prevents Choking of strainers
- Prevents damage to pumps and other equipment
- Reduces chances of air lock
- Removes impurities heavier than water
Features
- Large surface area per volume
- Minimal resistance to fluid flow
- Low water velocity
- Deflection of fluid stream in many different directions by the Pall rings
- Creation of non-turbulent zone in the extended lower part
Features
- Used for pressurising chilled water system in HVAC applications
- Provide make up water to pressurised water system
- Double pump, 1 working + 1 stand-by
- Microprocessor based control panel with dry run protection & duty cycling
- Multistage centrifugal type pumps-quiet, reliable and rugged
Features
- Removes dissolved air and microbubbles
- Double pump, 1 working + 1 stand-by
- Senses and maintains system pressure
- Microprocessor based controller with display
- Programmable deaeration schedule
Features
- New Technology for Dirt removal
- Uses PALL rings instead of perforated sheet strainer
- Dirt removed by simply opening drain plugs
- Built-in flow straightener
- Compact size
Features
- Brass construction
- Nylon float/internals
- Built-in check valve
- Sizes 3/8", 1/2", 3/4", 1"
- Maximum operating pressure 10 bar
Features
- Brass body
- Nitrile sealing bushes
- Connection size 1/4"
- Maximum operating pressure 16 bar (20 bar optional)
- Maximum working temperature 110°C
Features
- Increases system water volume.
- Adds thermal mass to the system
- Has 2 or 4 connections depending on application.
- Multiple connection sizes for each tank size.
- Automatic Air Vent provided to remove accumulated air.
Features
- Prevents the accumulation of troublesome solids in the tower basin.
- Minimizes manual cleaning, maintenance, downtime of cooling tower.
- Maintains downstream thermal efficiency of heat transfer surfaces.
- Pump dry run protection.
- Programmable purge timer facility with HOA switch.
Features
- Fully automated degassing and water make-up.
- Works on pressure differential deaeration principle.
- Microprocessor based control panel.
- BMS compatible.
- Brings gas content to near zero.
